Industry News

Home / News / Industry News / How to use automatic blow molding machine?

How to use automatic blow molding machine?

When the room temperature blow molding machine is used in the installation position, the bracket and spray parts are placed in the protected room, about 5 meters to 8 meters away from the door; the air compressor trolley is placed outdoors, and the spray parts are connected with cables and air hoses. . The operator can operate the electrical cabinet of the air compressor trolley outdoors. The spray parts and brackets can be carried by a single person, and can be quickly disassembled and assembled, inserted before spraying, and carried out after spraying. The whole set of machines can be operated by 1 person or 2 persons. At present, the type and dosage of the normal temperature bottle blowing machine are the same as those of the manual bottle blowing machine.

The large motor drives the air compressor to generate compressed air (pressure of 150 kPa to 201 kPa), which enters the vortex chamber of the nozzle through the air hose. A high-speed rotating air flow is generated and a partial vacuum is formed, and the medicine tank liquid is sucked into the spray head through the infusion tube. The air and the liquid medicine are mixed at high speed and atomized into a blown bottle with an average diameter of about 20 microns, which is sprayed from the nozzle. At the same time, the small motor drives the axial flow fan to generate low pressure and large air flow, blowing the nozzle to the distant place. It can propagate more than 30 meters along the axis, and the width can reach more than 6 meters. After 30 minutes to 60 minutes of spraying in the limited confined space of the protected area, the blown bottles can be evenly distributed and float around the room. And suspended in the space for 2 hours to 3 hours, so that the bottle blowing can fully contact the active parts of crop diseases and insect pests, and produce a better control effect. This machine is applicable to emulsions, wettable powders, liquids, oils, etc. The spout can be adjusted in the height range of 0.9 meters to 1.3 meters according to the height of the crop varieties.

Master Packing Co.,Ltd was founded in 1997, is a professional China Bottle Machines manufacturers and Bottle Machines factory. Because of Advanced CNC machinery, 5 axis drilling machine, Lathe, a group of more than 15 years experienced engineers, Master brand Packing machine now exported more than 87 countries and district.Master Packing focus on Injection mold machine, PET/PP bottle blowing machine, PET/Glass/Can filling line and custom Bottle Machines for sale, Also Master Packing supply the labeling machine and molds. Master packing design and manufacturing the simplest machine, let customer has ability to run and operate the machine in short time, Meanwhile, Master packing is strict with the quality control, Supply customer with stable and long life machine.