News, Industry News

Home / News / Three common problems of flat labeling machine

Three common problems of flat labeling machine

A labeling machine equipment used in the packaging industry is a flat labeling machine. The flat labeling machine has the characteristics of fast labeling speed and high efficiency, but no matter how perfect a labeling machine is, it will be more or less There are fewer mechanical wear or failure problems, so what are these problems and how to solve them?

Machinery has its own corresponding service life, which is wear. The key to determining the length of the service life is the quality of the product, which is the material used. Of course, a large part of it lies in whether the manufacturer of the equipment has maintained and maintained the equipment in accordance with the regulations.

Generally speaking, there are three common places where the flat labeling machine fails. The hardware is the conveyor belt and the labeling rotation axis, and the software is the system parameter. Then what are the main problems with the conveyor belt of the flat labeling machine What? The problem of the conveyor belt is well understood. Generally, the manufacturer has not carried out production work according to the weight limit parameters of the labeling machine manufacturer. Long-term overload work will eventually cause the conveyor gear to wear and damage. Environmental factors, the working environment is humid, which causes gears to rust, which leads to problems of jamming or stopping of the conveyor belt due to unsmooth conveying and labeling. This kind of problem is easy to avoid as long as we pay a little attention. Regular maintenance and mechanical work according to the specified parameters are very important.

In addition, what is the reason for the damage of the labeling rotating shaft? The reason for this problem is actually the overloaded use of the flat labeling machine. Because the flat labeling machine has been working for a long time for a long time, the higher the temperature in the shaft, the larger the friction coefficient, and finally the leakage The best way to solve the problems of labeling, failure to mark, and re-labeling, is to solve the problem of damage to the rotating shaft of the flat labeling machine, that is, to regularly lubricate the inside and outside of the shaft and parts so that it can work normally.