News, Industry News

Home / News / What is the hazard of excessive temperature generated by the injection molding machine?

What is the hazard of excessive temperature generated by the injection molding machine?

When using the injection molding machine, prevent the temperature of the injection molding machine from being too high, because if the temperature of the injection molding machine is too high, it will cause greater harm.
1. Excessive temperature of the injection molding machine will cause mechanical deformation due to heat, and its moving parts will become stuck due to the smaller gap between them, which will lead to poor work quality.
2. If the temperature of the injection molding machine is too high, the viscosity of the oil will decrease and leakage will occur. Because the viscosity of the oil decreases and the lubrication effect becomes worse, its frictional resistance will increase, which will increase the friction.
3. The high temperature of the injection molding machine will cause the rubber seal to deform. After the deformation, it will accelerate the aging, will reduce the characteristics of the seal and the service life, and cause the leakage of the medium.
4. If the temperature of the injection molding machine is too high, it will accelerate the deterioration of the oil due to oxidation. This precipitate can block the small holes and the valve, causing the valve to be stuck and unable to perform normal work.

More about:Injection Molding Machine Factory